To unbox and set up the ( 123.hp.com/setup4520 )  HP Envy 4520 printer device for the first time, you will have to follow the below set of steps. We have made these steps simple and easy for you to understand and follow.

  • Firstly you will have to remove or cut all the tapes surrounding the printer box to open the printer box.
  • Then you will have to take out all the printer parts or accessories and them safely so that you can make use of it later.
  • Then take out the printer device from the box, you will also find a user manual and CD in the box, take and keep them safe too.
  • The CD that is provided with the printer box contains the printer driver software that is to be installed to start off with your printing process.
  • Now you will have to recheck whether the printer device, the scanner, the input tray and the control panel are free from tape.
  • Now you will have to plug in the power cord to the printer device and to the wall outlet so that you can switch ON your HP Envy 4520 printer device.
  • Now once you have switch your printer device on you will have to select the language of your desire, and the country / region from where you are using your printer device and then you will have to press OK so that the changes will be saved.
  • Once you are ready with all the above steps you will have to insert the ink cartridges in to your HP Envy 4520 printer device and then press OK to load the sheet of papers into the main tray of your HP printer device.
  • The printer will now provide with an alignment page. Then you will have to place the alignment page on the scanner of your HP Envy 4520 printer device.
  • Once you have placed the alignment page carefully you will have to close the scanner lid firmly and then click OK.
  • Once scanned, an Alignment Successful message appears. Then you have to click OK to continue. The printer will start to print.